LOW OFF-AXIS COLORATION
With remarkably low off-axis coloration, the S-Mic 2 is designed to pick up rich, full sounds on set, even in the hands of a novice boom operator.
ALL-METAL BUILD
The S-Mic 2’s body is 100% brass making it both an incredibly strong and durable piece of equipment AND resistant to RF interference.
WEATHER-RESISTANT
The internal circuitry is sprayed and coated with a clear epoxy that allows the microphone to perform without issue in even the most humid environments. This coating also gives the mic a water-resistance level that allows it to work in the rain without being damaged.
ULTRA-LOW SELF NOISE
The S-Mic 2 has an ultra-low noise floor at 12dB (A-weighted), 24dB (CCIR 268-3). Combined with its anti-RF interference build, the S-Mic 2 is able to be boosted in post with a lot less background noise than other microphones on the market.
S-MIC 2PRO SHOTGUN
SPECIFICATIONS
| SPECIFICATIONS | |
|---|---|
| Sound Field | Mono |
| Transducer | Condenser |
| Polar Pattern | Supercardioid |
| Frequency Range | 50Hz to 20kHz |
| Equivalent Noise Level | 12 dB A-Weighted |
| Maximum SPL | 130 dB SPL |
| THD | 75 Ohms |
| Load Impedance | 800 Ohms |
| Sensitivity | 32±2dB re 1V/PA @ 1 kHz |
| Output Connector | 3-Pin XLR |
| Operating Current Consumption | 1.5mA |
| Operating Voltage | 48V |
| Operating Temperature | 14 to 158°F / -10.00 to 70.00°C |
| Length | 9.84″ / 250 mm |
| Diameter | 0.75″ / 19 mm |
| Weight | 0.44 lbs / 198 g |